Specifications
1.SPTS and MPTS code stream
2.two groups separate output
3. ISDB-Tb digital TS multiplexer
ISDB-T digital TS multiplexer
Outline
NDS3105A ISDB_T multiplexer is a TS re-multiplexer developed to adapt Japan and those South American countries such as Brazil and Argentina. It supports 2 separate multiplexers which are fully complying with ISDB-T standard. This multiplexer can transfer the head-end single program and multi-program to ISDB-T standard TS as required. Additionally, it also supports PSI/SI table editing and generating, single frequency network and IIP packet editing and inserting. What’s more, the NDS3105A ISDB-T multiplexer can support up to 6channels input and 2 channels output, the transmission mode is compatible with hierarchy. User can upgrade and control the multiplexer system online through network.
Specifications
Signal inputting
|
12 groups inputting ( max value 214Mbps/group)
|
188/204Byte transmission stream packet
|
TS packet mode and suddenly code rate mode
|
GPS 10mhz reference clock inputting
|
GPS 1pps signal inputting
|
Re-multiplexing
|
TS re-multiplexer
|
256 PID mapping for each group(manual, auto optional)
|
PCR correction
|
PSI/SI table automatically generating
|
Modulation parameter
|
mode mode1(2k) model2(4k) model3(8k)
|
Guard interval 1/4 1/8 1/16 1/32
|
Coding rate 1/4 2/3 3/4 5/6 7/8
|
constellation DQPSK QPSK 16QAM 64QAM
|
Layer A A+B A+B+C
|
Bandwidth 6MHz 7MHz 8MHz
|
SFN parameter
|
Maximum time delay 0ms ~ 1000ms
|
Off set -1000ms ~ +1000ms
|
Device ID 0 ~ 30
|
Output
|
2 groups separate output
|
RS encoding output supporting
|
1pps signal loop-out
|
General
|
Demissionn 44mmx482mmx410
|
Temperature 0~45°C(operation) -20~80°C(storage)
|
Power supply 220VAC±10%,50Hz,10W
|

